MATLAB Parallel Server in Red Cloud
- You are a member of an academic community with access to an academic MATLAB 2016a client.
- You are familiar with Red Cloud and its Eucalyptus console.
- The MATLAB R2016a client, including the Parallel Computing Toolbox (PCT), is installed on your local workstation.
- First time Red Cloud login has been completed.
- Create a Red Cloud key pair has been completed.
Create a Security Group
In the Eucalyptus Management Console (for recdcloud-ith), you need to create a Security Group for your MATLAB instances. Its purpose is to open up certain TCP ports so your client has proper access to your MDCS server(s).
Choose "Security Groups", then "Create a new Security Group", and set the following Rules. Note, to auto-fill <your client IP address>/32, you can select the "Use my IP address" link after entering either the Custom TCP port range or the standard SSH port. You must click "Add Rule" at the bottom of the page after making each new entry. You must also click "Create Security Group" after adding all rules.
|Protocol||Port range||Allow traffic from IP address|
|Custom TCP||14000 - 15000||<your client IP address>/32|
|Custom TCP||27000 - 28000||<your client IP address>/32|
|SSH (for terminal access)||22 - 22||<your client IP address>/32|
If you wish, you can set the security group to allow access from a broader range of IP addresses. For example, if the allowed IP ranges are set to:
- 220.127.116.11/24, and
access is permitted from anywhere on Cornell network (reference). However, you should be aware that in this case, any Cornell user who has knowledge of the IP address and the cluster name will be able to submit MDCS jobs to your Red Cloud instance(s).
In general, if other users require access to your Red Cloud instance for their MDCS jobs--or if you will be accessing MDCS from multiple IP addresses--then it is probably best to add the extra IP addresses to the security group individually, in the same way as the first.
Start the MATLAB Cluster
Currently only one-node clusters are supported. However, a single node can support many workers, up to the total number of cores that you assigned to your instance. Multi-node cluster support is forthcoming.
In the Euca Console (redcloud-ith):
- From the dashboard, click on the "Launch Instance" button.
- Select the Matlab-2016a instance (emi-bf43866d) on the "Image" screen in one of two ways:
- Scroll to find the image and click its "Select" button.
- Enter emi-bf43866d in the search box at the bottom and click the "Next" button.
- On the "Details" screen, select the desired instance type. One MATLAB worker will be started per CPU in the instance. Click on the Next button.
- On the "Security" screen, select the ssh keypair you'd like to use to access the instance via ssh (optional), and select your MATLAB security group.
- Click on "Launch Instance"
- After the instance is running, the MATLAB cluster should be reachable at the public IP address of the instance within 2 minutes.
Note: after you finish using your MATLAB cluster, remember to stop or terminate the instance on the Euca Console to stop charges against your Red Cloud subscription.
Connect to Your MATLAB Cluster
Perform the following steps in your local MATLAB client:
- Open Parallel > Manage Cluster Profiles.
- Choose Add > Custom > MATLAB Job Scheduler (MJS).
- In the warning dialog that comes up, click "OK".
- In the lower right corner of the scheduler, click "Edit".
- Enter values for at least the top three values in the form:
- Description: Red Cloud or another name of your choosing.
- Host: 128.84.8.XXX (where XXX matches the public address of your Red Cloud instance)
- Name: EC2_job_manager
- Click "Done". Click "Rename" in the toolbar to give a new scheduler a better name. This name will appear in your MATLAB client.
- Click "Validate" in the toolbar to ensure the scheduler is configured properly. As each stage completes, a green circle with a check mark in it should be displayed.
- If the first validation stage fails, it is most likely because the Euca Security Group is not allowing access from your client's IP address:
- Log into the Euca Console (redcloud-ith) using a web browser on the same machine as your MATLAB client.
- Choose the Security Group you created and try to add one of the above rules, finishing with "Use my IP address".
- If you do not get the message "Rule already exists", go ahead and add all three of the above rules for your current IP address.
- Wait a few minutes until the new rules take effect in your running instance (you may also want to restart your MATLAB client). Run the validation test again to ensure your MATLAB cluster passes all the stages.
- If the client is able to connect to the cluster but fails at the second stage, check the validation results ("Show Details").
- If you see an error message saying, "This MATLAB Job Scheduler does not support running jobs for MATLAB release 'R2016a'", this just means that the workers are not yet ready.
- Wait a few more minutes and re-try validation.
Test Your MATLAB Cluster
Finally, you can run this quick "Hello, world" test from the command line in your client. In the first line, supply the name of your scheduler. If you did not rename the scheduler when you created it, its name appears in the Cluster Profiles Manager dialog.
pool = parpool('Red Cloud') spmd; fprintf('Hello from lab %d of %d', labindex, numlabs); end delete(pool)
The number of replies should equal the number of workers ("labs"), which by default is equal to the number of cores in your instance. Note that the labs are numbered starting from 1, not 0.
Upload Large Files to Your MATLAB Cluster
MATLAB PCT provides built-in mechanisms for uploading data files so they can be accessed by your MDCS workers. The primary ones are the AttachedFiles keyword in the parpool() function, and the addAttachedFiles() function for an existing parallel pool. Unfortunately, these mechanisms are unsuitable for large files, because they generate a separate copy of the file for each worker. This is inefficient and unnecessary in Red Cloud, where in most cases, all the workers share a file system on the same instance. Here we present two alternatives that should help you to make data files available to your MDCS workers.
Prerequisites: you must have created a Red Cloud key pair before starting your instance, and you must have specified this key pair when the instance was launched. You should also be familiar with how public key authentication works in Linux. Finally, in order to connect to the instance using ssh, sftp, or scp, the Red Cloud security group should include a rule to allow incoming connections to port 22 from the address of the computer that is trying to connect.
Alternative 1: Upload to /tmp on your instance
This method is probably the simpler of the two. Any files you upload will persist on your instance until you terminate it. The only tricky part is knowing how to authenticate with the key pair when you connect to your instance with a file transfer client. It is straightforward to do this type of authentication from the command line in Linux or MacOS, if you use either sftp or scp:
sftp -i ~/.ssh/myCACid-key.pem firstname.lastname@example.org.NNN sftp> put file.txt /tmp
scp -i ~/.ssh/myCACid-key.pem file.txt email@example.com.NNN:/tmp
The above examples assume you have stored the the key pair (or at least the private-key portion of it) in your local .ssh folder in Linux or MacOS. Note that in Windows, the PuTTY client comes with a psftp client that you might want to try.
If sftp or scp does not accept the -i option in your OS, you can try using ssh-agent and ssh-add to make the private key available to these commands.
Alternative 2: Upload to your CAC home folder
Your Red Cloud subscription includes a home folder at CAC. It is available as a network share located at //linuxlogin.cac.cornell.edu/myCACid, where myCACid is your CAC username. Your Red Cloud subscription comes with 50GB of storage, part of which can be used to store data files at this location. (More storage can be added to your subscription if desired.) To upload files to your home folder, use your favorite file transfer client such as WinSCP, or a command-line utility such as sftp or scp. Point your file transfer client or utility to the above address, making sure to provide your CAC username and password.
But this CAC home folder is not automatically available to your Red Cloud instances. The preferred way to make it accessible is to mount the network share using Samba/CIFS. First log in to your instance as root, which you do with your private key:
ssh -i ~/.ssh/myCACid-key.pem firstname.lastname@example.org.NNN
The above example again assumes you have stored the the key pair in your .ssh folder in Linux or MacOS. In Windows, you may wish to use PuTTY as the ssh client (in which case you will have to generate a .ppk file from the .pem file using PuTTYgen.) After you are logged in, issue the following commands:
yum install cifs-utils mkdir /home/myCACid mount -t cifs -o username=myCACid //storage01.cac.cornell.edu/myCACid /home/myCACid <supply your CAC password when prompted>
At this point all files in your home folder should be available to all MDCS workers, via a path starting with /home/myCACid/.
If you stop this Red Cloud instance and start it back up, the mount command will have to be executed anew. To make the Samba mount automatic during restarts, add an appropriate entry to /etc/fstab in the instance.