Setting Up Canopy Environment

From CAC Documentation wiki
Revision as of 09:31, 26 May 2016 by Wbt3 (talk | contribs) (Created page with "=='''Setting Up Canopy Environment'''== Use the follow instructions to set up your user environment to use canopy-1.4.1 (python): * Run canopy: /opt/canopy-1.4.1/canopy *...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Setting Up Canopy Environment

Use the follow instructions to set up your user environment to use canopy-1.4.1 (python):

  • Run canopy:
 /opt/canopy-1.4.1/canopy
  • Click "Continue" on Canopy Environment Setup screen:

Canopy Environment Setup.png

  • Select "Yes" on Make Canopy your default Python environment screen and click "Start using Canopy". You can quit the GUI at this time.

Canopy Default.png

  • Add the following line in your .profile
VIRTUAL_ENV_DISABLE_PROMPT=1 source ~/Enthought/Canopy_32bit/User/bin/activate
  • Log out and log back in. You should see python defaults to Canopy python in your user environment:
 -bash-4.1$ which python
 ~/Enthought/Canopy_64bit/User/bin/python